We have a new website! If you’re paying for a pre-order, please do so here. If you’re looking to place new orders, head over to the all the new classonemodelworks.com site.
We have a new website! If you’re paying for a pre-order, please do so here. If you’re looking to place new orders, head over to the all the new classonemodelworks.com site.
STEEL HALF-LADLE SECTION
This load is a model of the upper half of a molten steel ladle being shipped on a Reading GSC depressed center flatcar (see 1964 picture below). The upper section will be joined to the bottom bowl section of the ladle at the delivery site and put into service. This model load comes complete with the ladle section, base cribbing, side braces and 0.4mm tie-down wire for mounting to a flatcar. The model parts come fully painted and ready for use. Below is a photograph of a nearly identical ladle which had been in factory use and is in the process of being cleaned. This load will be correct for steel operations in nearly all eras Also, we have included a photo of the load installed on a Classonemodelworks.com GSC flatcar to illustrate the finished result after mounting.
Check back soon for video mounting instructions.
Size: 3” L x 1-3/16” W x 2-1/4” T
The “flat-land” operating Rock Island ordered their GP40 without Dynamic Brakes. The lack of the dynamic brake blister in the middle of the long hood gave the Rock Island units a unique appearance among GP40 fleets.
Tsunami2 Digital Sound Decoders integrate a full-featured sound system, Hyperlight™ lighting effects, Hyperdrive2™ advanced motor control, and a DCC decoder into a single package. Tsunami2 Digital Sound Decoders offer over 50 individual sounds and over 20 lighting effects in each model!
Open hood doors were a very common sight on hood units operating in the late 1960s-1990s. Our models offer this prototypical detail as an option on our GP40 locomotive models providing five door opening settings per side including closed. Some doors will include a fire extinguisher detail.
Classonemodelworks.com will be powering the number one fan in a prototypical manner. The number one fan is prototypically the fan that operates nearly constantly with fans two and three only being powered up when needed.
Tsunami2 decoder installation:
$50.00 plus decoder cost
The TSU-21PNEM is a 1-amp Digital Sound Decoder with six function outputs designed for easy plug-in operation when mated to a 21-pin NEM connector. You will feel like you are in the cab with the amazing new features that Tsunami2 has to offer including: Reactive Dynamic Digital Exhaust, Functioning locomotive and train brakes, injectors, power reverse, and firebox flicker. We also offer a large selection of selectable sound effects including: exhaust chuffs(10), prime movers (up to 12), bells (12), Whistles (90), airhorns (40+), couplers, dynamos and more!
The TSU-21PNEM can be wired to a CurrentKeeper (P.N. 810140) to maintain performance over dirty track and switches.
Have questions? Email us: contactus@classonemodelworks.com
Call us at (816) 243 – 0044
Looking to purchase our products for wholesale? Reach out to us at via email to set up an account.
